JVC mx-j850r Benutzerhandbuch
– 7 –
RIGHT
LEFT
SPEAKERS
1
Connect the AM loop antenna to the AM
LOOP terminals as illustrated.
LOOP terminals as illustrated.
2
Turn the AM loop antenna until you have the
best reception.
best reception.
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered wire
to the AM EXT terminal and extend it horizontally. (The AM
loop antenna must remain connected.)
to the AM EXT terminal and extend it horizontally. (The AM
loop antenna must remain connected.)
For better reception of both FM and AM (MW/LW)
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
AM (MW/LW) antenna
Vinyl-covered wire
(not supplied)
(not supplied)
AM loop antenna
(supplied)
(supplied)
Connecting Speakers
You can connect a pair of front speakers, one center speaker,
a pair of rear speakers, and one subwoofer.
a pair of rear speakers, and one subwoofer.
To connect front speakers
Right
speaker
Left
speaker
Black
Red
1
Press and hold the clamp of the speaker
terminal on the rear of the unit.
terminal on the rear of the unit.
2
Insert the end of the speaker cord into the
terminal.
terminal.
Match the polarity of the speaker terminals: Red (+) to
red (+) and black (–) to black (–).
red (+) and black (–) to black (–).
3
Release the finger from the clamp.
IMPORTANT: Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the
rear of the unit.
impedance as indicated by the speaker terminals on the
rear of the unit.
Speaker
cord
cord
Speaker
cord
cord
1
2, 3
COAXIAL
ANTENNA
AM LOOP
GND
FM 75
AM EXT
2
3
1
EN01-09.MXJ850R[B]/f
00.4.21, 4:31 PM
7