JVC mx-j850r Benutzerhandbuch
– 12 –
Surround modes *:
D.CLUB:
D.CLUB:
Increases resonance and bass.
HALL:
Adds depth and brilliance to the sound.
STADIUM:
Adds clarity and spreads the sound, like in
an outdoor stadium.
an outdoor stadium.
SEA modes:
ROCK:
ROCK:
Boosts low and high frequency. Good for
acoustic music.
acoustic music.
POP:
Good for vocal music.
CLASSIC:
Good for classical music.
Manual modes:
MANUAL1/2/3: Your individual mode stored in memory.
MANUAL1/2/3: Your individual mode stored in memory.
See “Creating Your Own Sound Mode —
Manual Mode.”
Manual Mode.”
OFF:
Cancels the sound mode.
* Surround elements are added to the SEA elements to create a
being-there feeling in your room.
When one of these modes is selected, the SOUND MODE
indicator lights up as —
When one of these modes is selected, the SOUND MODE
indicator lights up as —
While one of the SEA modes including manual modes (SEA
elements without surround elements) is selected,
it lights up as —
elements without surround elements) is selected,
it lights up as —
While using one of the surround modes
You can adjust the rear speaker output level if the rear
speakers are connected. Once you adjust the rear speaker
output level for each surround mode, the adjusted level is
stored in memory.
• You cannot adjust the right and left rear speaker levels
speakers are connected. Once you adjust the rear speaker
output level for each surround mode, the adjusted level is
stored in memory.
• You cannot adjust the right and left rear speaker levels
separately.
On the remote control ONLY:
1
Press and hold SHIFT.
2
Press REAR LEVEL – / + button.
• Pressing REAR LEVEL – decreases the
output level (from +10 to –10).
• Pressing REAR LEVEL + increases the
output level (from –10 to +10).
3
Release SHIFT.
Creating Your Own Sound Mode
— Manual Mode
— Manual Mode
You can change SEA pattern to suit your preference. These
changed settings can be stored in the MANUAL 1, 2, and 3
modes.
• There is a time limit in doing the following steps. If the
changed settings can be stored in the MANUAL 1, 2, and 3
modes.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
again.
• If you want to add the surround elements in your SEA
pattern, select one of the surround modes (D.CLUB,
HALL, or STADIUM) before starting the following
procedure.
HALL, or STADIUM) before starting the following
procedure.
On the unit ONLY:
1
Press and hold SEA CONTROL
until “SEA CONT” appears on the
display.
until “SEA CONT” appears on the
display.
2
Adjust the SEA pattern.
1) Press
4 or ¢ to select the
frequency range to adjust
(LOW, MID, HIGH).
(LOW, MID, HIGH).
2) Press
1 or ¡ to adjust the
level (–3 to +3) of the selected
frequency range.
frequency range.
3) Repeat steps 1) and 2) to adjust the level of
the other frequency ranges.
3
Press SEA CONTROL again.
4
Press
4 or ¢ to select one of the
MANUAL 1, 2, and 3 modes into which you
want to store the SEA pattern.
want to store the SEA pattern.
5
Press SEA CONTROL again.
The SOUND MODE indicator also lights up.
The SEA pattern you have created are stored into the
MANUAL mode selected in the above step.
The SEA pattern you have created are stored into the
MANUAL mode selected in the above step.
To use your own sound mode
Select MANUAL 1, 2, or 3 mode when using the sound
modes. See “Selecting the Sound Modes” on page 11.
modes. See “Selecting the Sound Modes” on page 11.
If you have stored your MANUAL 1, 2, and 3 modes
with the surround elements
with the surround elements
You can also adjust the rear speaker output level. See “While using
one of the surround modes.”
one of the surround modes.”
SOUND MODE
SOUND MODE
Current level appears.
SET
SEA CONTROL
PRESET
TUNING
SET
SEA CONTROL
SET
SEA CONTROL
SHIFT
REAR
LEVEL
+
–
EN10-15.MXJ850R[B]/f
00.4.21, 4:31 PM
12