Toshiba A40 Series Benutzerhandbuch
User's Manual
7-4
HW S
ETUP
AND
P
ASSWORDS
NOTE: It is a good idea to create more than one Key FD in case a Key
FD is damaged or lost.
FD is damaged or lost.
To create a Key FD follow the steps below.
1. Turn off the computer’s power.
2. Connect the diskette drive to a USB port on the computer.
3. Set a diskette’s write-protect tab to the write enable position and insert the
2. Connect the diskette drive to a USB port on the computer.
3. Set a diskette’s write-protect tab to the write enable position and insert the
diskette in the drive.
NOTE: All data on the diskette will be destroyed.
4. Turn on the computer’s power.
Password=
will be displayed on the LCD.
5. Enter the password.
6. Press the Tab key.
6. Press the Tab key.
Insert FD Ready (Y/N)
will be displayed on the LCD.
7. Press Y.
Remove FD press key
will be displayed on the LCD.
8. Remove the diskette and press any key.
Device Config
Device Configuration
This option lets you set the device configuration.
All Devices
BIOS sets all devices.
Setup by OS
Operating system sets devices that it can control. (Default)
Parallel/Printer
Some models are equipped with Parallel/Printer tab. This tab lets you set the Parallel
Port Mode. Use the Windows Device Manager to make settings for the Parallel port.
Port Mode. Use the Windows Device Manager to make settings for the Parallel port.