Toshiba qosmio f60 Benutzerhandbuch

User’s Manual

7-3

HW Setup

You can override the settings and manually select a boot device by

pressing one of the following keys while the computer is booting:

The floppy diskette drive will be used to start the computer when there is

a bootable disk contained in the external drive. If SD memory card is

installed as well, the external floppy diskette drive will be checked first,

followed by the SD memory device itself.

In this computer, CD-ROM refers to the Fixed optical disc drive. The

optical disc drive will be used to start the computer when there is a bootable

disk contained in the drive.
To change the boot drive, follow the steps below.
1. Hold down F12 and turn the computer on. When the Qosmio logo

screen appears, release the F12 key.

2. Use the up and down cursor keys to select the boot device you want

and press ENTER.

USB Memory BIOS Support Type

This option allows you to set the type of the USB memory to be used as a

startup device.

Selects the USB floppy diskette drive

Selects the network.

Selects the built-in hard disk drive.

Selects the CD-ROM

Selects the USB memory drive.

Selects the eSATA HDD.

If a Supervisor Password has been set, manual boot device selection

functions may be restricted.
The boot device selection methods described above will not change the

boot priority settings that have been configured in HW Setup. In addition, if

you press a key other than one of those listed, or if the selected device is

not installed, the system will continue to boot according to the current and

available settings in HW Setup.

HDD

Sets the USB memory to be the equivalent of a

hard disk drive (default). With this setting, the

USB memory device can be used to start the

computer as though it were a hard disk drive

based on the hard disk drive settings within both

the Boot Priority and HDD Priority options

detailed previously.