Toshiba PSA20 Benutzerhandbuch
P
OWER
6-15
Starting the computer by password
If you registered a user or supervisor password, you must enter it to start the
computer. For information on setting a
computer. For information on setting a
Chapter 7, HW Setup and Passwords.
To start the computer with the password, follow these steps:
1.
Turn on the power as described in Chapter 3,
message appears:
Password=
NOTE: At this point, the hot keys
Fn
+
F1
to
F5
do not work. They will
function after you enter the password.
2.
Enter the Password.
3. Press
Enter
.
NOTE: If you enter the password incorrectly three times in a row, the
computer shuts off. In this case, you must turn the computer back on to
retry password entry.
computer shuts off. In this case, you must turn the computer back on to
retry password entry.
Power-up modes
The computer has the following power-up modes:
❖
❖
❖
❖
❖
Boot: Computer shuts down without saving data. Always save your work
before you turn the computer off in boot mode.
before you turn the computer off in boot mode.
❖
❖
❖
❖
❖
Hibernation: Data in memory is saved to the hard disk.
❖
❖
❖
❖
❖
Standby: Data is maintained in the computer’s main memory.
in Chapter 3, Getting Started.
Windows utilities
You can specify the setting in TOSHIBA Power Saver.
Hot keys
You can use hot keys
Fn
+
F3
Fn
+
F4
to enter
. See Chapter 5, The Keyboard, for details.
Power-up modes