Toshiba PSA20 Benutzerhandbuch

Seite von 244
O
PERATING
 B
ASICS
 4-11
Be sure to connect the universal AC adaptor when you write or rewrite.
Be sure to close all other software programs except the writing software.
Do not run software such as a screen saver which can put a heavy load on the
CPU.
Operate the computer at full power. Do not use power-saving features.
Do not write while virus check software is running. Wait for it to finish, then
disable virus detection programs including any software that checks files
automatically in the background.
Do not use hard disk utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and damage data.
Write from the computer's HDD to the CD. Do not try to write from shared
devices such as a LAN server or any other network device.
Writing with software other than Drag’n Drop CD+DVD has not been con-
firmed. Therefore, operation with other software cannot be guaranteed.
When writing or rewriting
Note the following when you write or rewrite a CD-R or CD-RW.
Always copy data from the HDD to the CD. Do not use cut-and-paste. The
original data will be lost if there is a write error.
Do not perform any of the following actions:
• Operate the computer for any other function, including use of a mouse or
Touch Pad, closing/opening the LCD panel.
• Start a communication application such as a modem.
• Apply impact or vibration to the PC.
• Install, remove or connect external devices, including the following:
PC card, SD card, USB devices, external display, optical digital devices.
• Use the CD/MP3 control buttons to reproduce music and voice.
• Open the optical media drive.
If the media is poor in quality, dirty or damaged, writing or rewriting errors may
occur.
Set the computer on a level surface and avoid places subject to vibration such
as airplanes trains, or cars. Do not use an unstable surface such as a stand.
Keep mobile phones and other wireless communication devices away from the
computer.
Writing CDs on CD-RW/DVD-ROM drive