Toshiba SD-R5112 Benutzerhandbuch

5 

 

Power Cable - Connect an internal computer power 
supply cable to the power socket at the back of the DVD 
Rewriteable drive. One side of the plug has chamfered 
edges, so the power connector fits only one way. Push 
plug completely into the socket making sure the plug fits 
correctly.  

Figure 4.Installing Power Cable 

 

 

Audio Cable (optional) - If you have a sound card and 
speakers, and would like to play audio CDs on your 
computer, you will need to install a CD/DVD audio cable. 
Toshiba's DVD Rewriteable drives use a standard 4-pin 
audio cable that can be purchased from most local 
computer suppliers. The sound cable connects to your 
sound card at one end and the other end connects to 
the digital audio connector at the left rear of the DVD 
Rewriteable drive (see DVD Rewriteable drive Back 
Panel

 

photo for location). Refer to the instructions that 

came with your sound card for details on any sound-
driver software required

.

 

 

 
After you have connected all the necessary cables, 
push the DVD Rewriteable drive completely into the 
computers drive slot. Mount drive per your computers 
instructions. The screw length should not exceed 
30.5mm (measured from outside surface of side or 
bottom of drive to tip of screw). Replace computer 
cover and all outer screws. 
 

 

 
Figure 6.Mounting Illustration