Toshiba strata cix ip5000-ug-vb Benutzerhandbuch

You can use the User Programming Mode (described below) for customizing your 
IP5000-series display telephone without the aid of an Administrator or Service 
Technician. The User Programming mode is accessed with a 

Program

 button 

assigned to a Programmable Feature Button or through an access code. User 
Programming enables users to customize these features:

•

Programmable Feature Buttons – The IP5000-series telephones have 10 or 20 
Programmable Feature Buttons to which the user can assign any one of 
approximately 50 different features. Once a Programmable Feature Button is 
programmed, press the button anytime you need to use the feature.

•

ACD and FeatureFlex Application keys are not supported on programmable 
feature buttons 11~20 of the large 9-line display telephone.

•

Directory number and external line buttons cannot be added or deleted, but their 
ring tones can be individually changed. See 

.



To enter User Programming Mode, press the 

Program

 button

...or dial 

#9876

. “USER PROG MODE” appears on your LCD. The Program 

LED is steady green. 



To exit User Program Mode Lift the handset off-hook / on-hook.

Programmable Feature Buttons are the unassigned buttons on your keystrip that can 
be used to store features. The number of available Programmable Feature Buttons 
depends on your telephone model and how the buttons are preassigned by the System 
Administrator. 

The following steps enable you to program features onto Programmable Feature 
Buttons.