Toshiba storage device division sd-r5002 Benutzerhandbuch

  

15 

Figure 1.SD-R5002 DVD Rewriteable Drive Rear Panel - Connectors 

 

 

Power 
Connector 

Power is supplied to your DVD drive by the connection with your computer's +5V/+12V 
power cable to the power socket at the back of drive. One side of the plug has 
chamfered edges, so the power connector fits only one way. 

 

CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in 
upside-down with power ON. 

Audio 
Connectors 

Supplies Analog and Digital sound to your system. 

The SD-R5002 DVD drive is connected to your computer system through the ATAPI 
connector. 

The mode select jumpers are 6 straight angle pins located on the rear of the DVD 
drive.  By placing a jumper on the pins, you can select the following functions: CL 
(CSEL), SL (Slave) or MA (Master). (see Setup for additional information).