kymco mo filly 50lx Servicehandbuch

REMOVAL
Remove the met-in box. (!2-3)

Remove the frame right side cover. (!2-4)

Disconnect the fuel unit wire connector.

Turn the fuel unit retainer counterclockwise

to remove it.

Remove the fuel unit.

INSTALLATION
The installation sequence is the reverse of

removal.

INSPECTION
Remove the fuel unit.

Measure the resistance between the fuel unit

wire terminals with the float at upper and

lower positions.

Wire Terminals

Upper

Lower

G_

Y/W

30W

686W

G_

L/W

566W

153W

Y/W_

L/W

599W

599W

FUEL GAUGE INSPECTION
Connect the fuel unit wire connector and turn

the ignition switch “ON”.

Check the fuel gauge needle for correct

indication by moving the fuel unit float up

and down.

Float Position

Needle Position

Upper

“F” (Full)

Lower

“E” (Empty)

＊

Be careful not to bend or damage the fuel

unit float arm.

＊

AC 110V

Do not damage the fuel unit wire.

＊

• Align the groove on the fuel unit with

the tab on the fuel tank.

• Align the arrow on the retainer with the

arrow on the fuel tank.

• Turn the retainer clockwise to secure it.

＊

Before performing the following test,

operate the turn signals to determine

that the battery circuit is normal.

＊

Fuel Unit

G

L/W

Y/W

Fuel Unit

Tab

Groove