kymco mo yup50 Servicehandbuch
13. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
13-19
YUP 50
INSTALLATION
Install the front shock absorbers onto the
Install the front shock absorbers onto the
steering stem.
Install and tighten the front shock absorber
upper mount bolts.
Tighten the lower mount bolts.
Install the front fender.
Install the front wheel. (!13-8)
Install the front wheel. (!13-8)
FRONT FORK
REMOVAL
Remove the steering handlebar. (!13-3)
Remove the steering handlebar. (!13-3)
Disconnect the speedometer cable and front
brake fluid pipe and remove the front brake
caliper.
Remove the front wheel. (!13-5)
Hold the steering stem top cone race and
remove the steering stem lock nut.
Remove the top cone race and remove the
front fork.
Inspect the ball races, cone races and steel
balls for wear or damage. Replace if
necessary.
Top Cone Race
Front Shock Absorber
Mount Bolts
Lock Nut Wrench
Be careful not to lose the steel balls (26
on top race and 19 on bottom race).
*
Lock Nut Socket Wrench