kymco mo p125 150 Servicehandbuch

Install the transmission case cover.

Install and tighten the transmission case cover

bolts.

Install the clutch/driven pulley. (!9-13)

Install the rear wheel. (!13-3)

Install the rear brake cable. (!13-5)

After installation, fill the transmission case

with the specified oil. (!3-7)

Specified Gear Oil:
KYMCO SIGMA GEAR OIL SAE 90#
Oil Capacity:

  At disassembly : 0.21 liter

  At change

: 0.181 liter

Install and tighten the oil check bolt.
Torque: 1.0_

1.5kg-m

Start the engine and check for oil leaks.

Check the oil level from the oil check bolt

hole and add the specified oil to the proper

level if the oil level is low.

Drain  Bolt

Transmission Case Cover

Oil Check Bolt Hole/Oil Filler

Bolts

• Place the motorcycle on its main stand

on level ground.

• Check the oil sealing washer for wear

or damage.

＊