kymco mo p125 150 Servicehandbuch

Remove      the  nut  attaching  the  front  tool

box.

Remove     the ignition switch decorative ring.

Remove (8-1)      the six screws that  combine

the front cover with the front tool box.

Remove (8-2)      the two screws attaching the

front cover.

Remove the front tool box.

Remove      the handlebar front cover bolt.

Remove (9-1)     the two  screws attaching the

handlebar rear cover.

Disconnect the headlight wire connector  and

remove the handlebar front cover.

Remove        the  bolt  attaching the  handlebar

rear cover.

Remove  (9-2)     

two  screws  inside  the

handlebar rear cover.

The  installation  sequence  the  reverse  of

removal.

Remove     the two  exhaust muffler joint lock

nuts.

Remove (10-1)           the  two  exhaust muffler

lock bolts to remove the exhaust muffler.

Remove  the  exhaust  muffler  joint  packing

collar.

When  installing,  first  install  the  exhaust

muffler packing  collar  onto  the  engine  and

then install the exhaust muffler.

Exhaust muffler lock bolt:3.5kg-m

Exhaust muffler joint lock nut:1.2kg-m