Yamaha DPX1000 Benutzerhandbuch

This is the input connector for signals (RGB/YP

B

P

R

/YC

B

C

R

)

from a component video or RGB source. Use a D-Sub monitor
cable when connecting another component to the DPX-1000
through this connector.

This connector receives video signals from the D connector of
other A/V components. It is compatible with the D1—D4
formats. (This connector is designed for the Japanese D format
only.)

These are input jacks for signals from component video or
RGB sources. Component signals from A/V equipment should
be connected to ports 3—5, and RGB signals from Computer
equipment to ports 3—7. Use a BNC cable when connecting
other components to the DPX-1000 through these jacks.

3 G/Y (G, or luminance signal)
4 B/P

B

/C

B

 (B, or color difference signal)

5 R/P

R

/C

R

 (R, or color difference signal)

6 HD/SYNC (horizontal sync signal, composite sync signal)
7 VD (vertical sync signal)

This jack receives S VIDEO signals from the S-VIDEO output
jack of other A/V components. Use an S VIDEO cable when
connecting other components to the DPX-1000 through this
jack.

■ Connections

This jack receives composite signals from jacks of other A/V
components. Use a video pin cable when connecting other
components to the DPX-1000 through this jack.

This jack receives DVI signals from computer equipment or
DVI signals from A/V equipments.

Connect the remote control to the IN jack when using it
through a cable. Codes input through the IN jack will be output
directly through the OUT jack.

This jack is used for factory testing.

This jack outputs control signals to external components. A
potential of 12V/Maximum 200 mA is provided when the
DPX-1000 is projecting.

Plug in the supplied power cord here.