Yamaha elb01e1 Benutzerhandbuch

ELB-01 Owner’s Manual

62

Rhythm/Keyboard Percussion

4

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

You can adjust the rhythm volume or amount of reverb applied to the rhythms and the 
percussion sounds used in the rhythms in the Rhythm Condition display. You can also 
have a Fill In play automatically by setting the Auto Fill function to ON.

To call up the Rhythm Condition display, select the desired rhythm and press the same 
rhythm button again.

The buttons at the right and left side of the display and DATA CONTROL dial can 
control the rhythm volume and reverb.

When Auto Fill is set to On (”) in the display, the Fill In pattern is automatically 
played whenever you switch the Main sections.
For details on how to set to On, see page 17. 

Fine Adjustment of rhythm volume.
Press the [C] button to make the “¿” indicator flash, then use the DATA CONTROL 
dial to change the setting.

0 – 24

Determines the amount of reverb applied to the rhythm.
Press the [D] button to make the “÷” indicator flash, then use the DATA CONTROL 
dial to change the setting.
When the Reverb Depth (for entire instrument) is set to the minimum, the setting here 
will have no effect.

0 – 24

<PERCUSSION>”AUTO.F⁄
VOL.¿12     REV.÷ 8 

Depending on the volume 
value (set in the display), 
two adjacent Volume button 
lamps may be lit at the same 
time, indicating an 
intermediate position.