Yamaha HTR-5930 Benutzerhandbuch

■ Using the test tone

Use the test tone to set speaker levels so that the volume 
from each speaker is identical when heard from your 
listening position. This is also possible when playing 
sources input at the MULTI CH INPUT jacks.

Press AMP on the remote control and then 
press TEST. 
The unit will output a test tone. 

Press u / d repeatedly to select a speaker to 
adjust.

• Select “TEST LEFT” to adjust the front left 

speaker output level.

• Select “TEST CENTER” to adjust the center 

speaker output level.

• Select “TEST RIGHT” to adjust the front right 

speaker output level.

• Select “TEST SUR.R” to adjust the surround right 

speaker output level.

• Select “TEST SUR.L” to adjust the surround left 

speaker output level.

• Select “TEST SUBWOOFER” to adjust the 

subwoofer output level.

Press j / i on the remote control to adjust the 
speaker output level.

The control range is from +10 dB to –10 dB for the 
center and surround speakers, and from 0 dB to 
–20 dB for the front speakers and subwoofer.

Press TEST on the remote control when you 
have completed your adjustment.
The test tone halts.

• You cannot use the test tone if headphones are connected to the 

PHONES jack. Remove the headphones from the PHONES 
jack.

• This operation will override the level adjustments made in 

“SETUP” (see page 20).

• You cannot adjust speaker levels if “SPEAKER SET” in 

“SOUND MENU” (see page 53) is set to “NONE”.

• You cannot adjust the subwoofer level if “BASS” in 

“SPEAKER SET” (see page 53) in the set menu is set to 
“FRNT”.

• If you use TEST to adjust speaker levels, the speaker levels you 

previously adjust during playback will also change.

• If you select “SETUP” (see page 20) and then select “SET”, 

speaker levels change in response to any changes you make in 
“SETUP”.

y

Depending on the source, the speaker levels set with the test tone 
may not be to your liking. In this case, adjust the speaker levels 
while listening to the source.