Euro-Pro sc500 Benutzerhandbuch

You can use the garment head diffuser 

with the hose or alone on the unit itself. To 

attach, align the pins on the 

garment head diffuser with 

the slots on the appliance.

Both the angle adapter and the small detail 
brushes can only be used directly on the 
concentrator nozzle. When using with the 
concentrator nozzle, push the attachment 
onto the end of the concentrator nozzle. 

Concentrator Nozzle
To attach the concentrator nozzle to the 

nozzle of the unit, align the pins on the 

concentrator nozzle with the slots on the 

appliance. (See illustration.) Push the 

attachment onto the nozzle until it stops 

against the appliance body. Turn in a 

clockwise direction 90°. The attachment 

is now locked into position. 

Step 1: Before filling the steam cleaner, 

make sure that the unit is NOT 

plugged in.

Step 2: Turn Safety Cap counter 

clockwise until removed.

Step 3: Add 20 fl. oz (600 cc) of water 

using the filling flask provided. 

Do not overfill. Replace 

Safety Cap by turning 

clockwise - press down firmly to 

tighten. Heating time is 

approximately 6 minutes. Filling 

the boiler with hot water will 

shorten heat up time.

Step 4: Plug the unit into a standard 

120 volt wall receptacle. The 

power “On” light (Red) will light 

up. 

Step 5: Allow approximately 3-5 

minutes for water vapor to 

reach its working 

temperature and pressure. 

When unit is ready for use the 

red light will change to Green. 

Step 6: At the start, some water will 

come out from the nozzle. This 

is normal.

Step 1: Disconnect electrical power 

cord from wall outlet.

Step 2: Press trigger button until all 

pressure has been released. 

Carefully unscrew safety 

cap.

Step 3: Allow the unit to cool for 

approximately 5 minutes 

before refilling with water.

Step 4: Slowly pour water using the 

filling flask into the boiler.DO 

NOT Fill Under a faucet, 

OVERFILL. Always leave 

Step 5: Release the locking trigger.

Step 6: Screw safety cap back on t

he appliance and plug 

appliance back into wall 

outlet. Steam will start to be 

produced as before.

Always insure that the 

unit is “UNPLUGGED” from the wall 

receptacle prior to initial filling or re-filling 

the water tank. Never attempt to fill this 

unit under a water tap, always use the 

filling flask provided. Failure to follow  

these steps will cause the water tank to 

overfill and may pose an electrical safety 

hazard.

Using the Locking Trigger Button
The steam cleaner has a locking trigger 

button. As you push down on the trigger 

you will get more steam. The trigger will 

lock when you have pushed it all the 

way. To unlock the trigger, just press 

down on the trigger release and the 

trigger will pop up, stopping the flow of 

steam.

Window Squeegee
CAUTION:

When cleaning windows, 

always avoid any sudden changes in 

temperature to prevent glass breakage 

or cracks.

To remove the 

window 

squeegee from 

the garment 

diffuser head, 

just push your 

thumb against 

the locking tab 

on the window 

squeegee.

To attach the window squeegee to the 

garment diffuser head, place the two 

hinges at the back of the window squeegee 

(see illustration) into the two open tabs that 

are at the back of the garment diffuser 

head. Swing the window squeegee up 

against the bottom of the garment diffuser 

head until the locking tab engages.

Using the detachable 

shoulder strap allows 

for greater freedom of 

movement when both 

hands are needed for 

various cleaning tasks. 

To attach the shoulder 

strap to the steam 

cleaner, simply 

snap the shoulder 

strap hooks onto the 

connecting rings on the 

unit body. When using 

the steam cleaner 

with the shoulder strap, 

avoid rocking or tilting 

the unit excessively as 

this may cause water to 

enter the hose and be 

discharged along with the steam.

NOTE: Disconnect steam cleaner from 

wall outlet before refilling. It is time to refill 

your steam cleaner when there is no more 

steam coming out of the nozzle.  Because 

the water tank is pressurized, use caution 

when opening to refill. Depress the trigger 

button while you unscrew the safety cap 

counterclockwise. Always let unit cool for 

5 minutes before refilling the unit with 

water. 

WARNING: This appliance is under 

pressure. After every use, press trigger 

button until all pressure has been 

released before removing safety cap. 

Either concentrator nozzle or hose must 

be connected in order for the trigger to 

operate. Allow unit to cool for three (3) 

minutes before refilling.