Eurotech Appliances apollo 1u ice fm12961 Benutzerhandbuch

 

There are two fans on the APOLLO 1U ICE that can be controlled - the processor/CPU 

fan, and the system fan. (The fan in the PSU runs at a predetermined speed.)  

 

You can independently control the fan speed and preset using the BIOS screens. To do 

this, follow these steps: 

Press F2 during boot up and enter the BIOS setup facility. 

  Use the right arrow key to choose the Advanced menu. 

  Use the down arrow key to highlight Hardware Monitor, and then press Enter. 

 Ensure 

 is highlighted, and then press Enter. 

  Highlight the fan you wish to set, and press Enter. 

  Change the fan speed to the desired percentage of its maximum capacity and 

press Enter. 

  Exit from the BIOS screens, saving your changes. 

© 2007 Eurotech Ltd    Issue C