Electro-Voice eds rev uhf wireless Benutzerhandbuch

Seite von 4
    
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
General Description 
The RE-V Wireless Microphone system combines frequency agility 
and ease of use like no other. The RE-V transmitters and receivers 
operate over a 24 MHz bandwidth in the UHF portion of the 
spectrum.  The high quality audio circuitry and advanced Radio 
Frequency (RF) signal processing offer broadcast quality signal-to-
noise and audio clarity. 
 
By combining four different frequency bands up to 44 simultaneous 
systems can work together on one stage.  Advanced Clearscan™ 
scans all available channels and displays a sorted list of the best 
coordinated groups of channels.  The scanning continues and sorts 
for the clearest channels in the coordinated group giving the user 
the best possible channel for their location. 
 
The entire audio path has been optimized to provide the truest 
representation of a wired microphone sound possible in a wireless 
system.  The Electro-Voice exclusive guitar audio optimization in 
the bodypack transmitter and the receiver combine to give that 
“wired” sound back to the bassist and guitarist.  The guitar setting 
lowers the low end response down to 30Hz, pads the input, and 
changes the audio for the best response possible from a wireless. 
 
The all new REV-H concert handheld transmitter is about the size 
and shape of a wired microphone to encourage proper microphone 
technique and uninhibited performances.  An alternative REV-PH 
presentation handheld includes a user accessible on/off/mute 
switch and another lightweight, small handheld. 
 
The Single and Dual receivers are full 19” rack mount units with 
integrated mounting hardware and IEC universal power supplies.  
The REV-D features antenna pass through that allows 6 channels 
of receive to be connected to two antennas with just the cables that 
come with the units.  Both units have parallel RJ45 jacks that allow 
the connection of CAN bus monitoring and control with a PC 
through the UCC-1 USB to CAN converter. 
 
Key Features 
•  950 Possible frequencies in 24MHz operating 
band 
•  Optimized audio path to provide true wired 
microphone sound 
•  Rugged machined aluminum handheld 
transmitter with interchangeable microphone 
elements 
•  Cast magnesium bodypack transmitter is 
extremely light and durable. 
•  5mW or 50mW transmit power on every 
transmitter 
•  REV-Link PC software monitoring and control 
of the receivers 
•  Advanced ClearScan™ scans for the clearest 
channel and group of channels. 
REV 
UHF Wireless  
Microphone System