Epson equity 286 plus Benutzerhandbuch

The SETUP program lets you select the type of hard disk

drive(s) installed in your computer. If you have two hard disk
drives, the first one is C and the second one is D. Be sure to
choose the correct setting for both drives.

Follow these guidelines:

If your system does not have a hard disk, select 

Not

installed 

for drives C and D. If you have only one hard

disk drive, select 

Not installed 

for drive D.

If your computer came with an Epson 40MB hard disk drive

(or if you install this drive yourself), select number 17 for

drive C.

If you have installed another type of hard disk drive, you

need to select the drive type number that matches your
drive. See “Hard Disk Drive Types” below.

If you have installed a hard disk in your computer that is not the
standard Epson 40MB drive (type 17), you need to select the

correct type number to match your drive.

The following table lists the types of standard hard disk drives

you can use in your computer. Check this table and the
documentation supplied with your hard disk to find the correct

type number for your drive. (Your drive’s documentation should
list all the parameters necessary to identify it using this table.) If

none of the types listed match your drive, see “Defining your

own drive type,” below.

Running the Setup