Epson EPL-7000 Benutzerhandbuch

A card or cartridge in a particular slot cannot be read. The

letter on the right side of the display indicates the slot

containing the card or cartridge that cannot be read. To

correct this error, take the printer off line and then press

If the error message remains, make sure the printer

is off line and remove the card or cartridge. If the red

light still flashes, press 

The printer is being initialized (reset) to the factory settings.

The printer has insufficient memory available for the task you

have given it. To correct the error, press 

If the

message remains, press 

or perform INITIALIZE as

described in Chapter 2.

This error can also be cleared by turning the printer off and

back on again. However, it may be necessary to simplify the

page you are trying to print or add more memory to the

printer. See Appendix A for information on memory options.

PAGE BUFFER FULL

Text or graphics data has filled the printer’s buffer and an

incomplete page is ejected. Press 

to clear the error.

You may need to add more memory to the printer. See

Appendix A for information on memory options.

The printer is feeding paper.

Paper is not being fed into the printer or paper is jammed

inside the paper path. You need to open the printer and clear

the jammed paper as described later in this chapter.