Fujitsu S1300 Benutzerhandbuch

Connect cables to the ScanSnap.

z

Using the Power Cable

1. Connect the power cable 

 to the power 

connector of the ScanSnap and plug in the 
AC outlet.

2. Connect the USB cable 

 to the USB con-

nector on the ScanSnap and the USB port on 
your computer.

z

Using the USB Bus Power Cable

1. Connect the USB bus power cable 

 to the 

power connector on the ScanSnap and the 
USB port on your computer.

2. Connect the USB cable 

 to the USB con-

nector on the ScanSnap and the USB port on 
your computer.

Open the ADF paper chute (cover) of the 
ScanSnap.

D The [Scan] button lights in blue, indicating 

that the ScanSnap is turned on.

D The ScanSnap should be automatically 

detected by your computer.

z

Use only the cables supplied with the 
ScanSnap.

z

To power on the ScanSnap, the USB 
cable and either of the power cables 
(power cable or USB bus power cable) 
are need to be connected.

z

When connecting to a USB hub, be sure 
to connect the ScanSnap to the hub 
nearest to your computer (first stage). If 
the ScanSnap is connected to a USB hub 
from the second stage onwards, it may 
not operate correctly.

z

If connecting the ScanSnap with USB 2.0, 
make sure that the USB port and the USB 
hub are compliant with USB 2.0. The 
scanning speed slows down if the 
ScanSnap is connected with USB 1.1. If 
your computer has the USB 2.0 
compatible port, use it.

The bottom part of the ScanSnap may 
become hot when the ScanSnap is used 
but this does not affect ScanSnap 
operation or cause any physical harm. 
Be careful not to drop the ScanSnap 
when carrying it.

[Scan] Button

ADF Paper Chute
(Cover)