Epson C82378 Benutzerhandbuch
Setting the IP Address
3-11
5. To assign the IP address manually, enter the IP address, the
subnet mask, and the default gateway. Be sure to give an IP
address which does not conflict with any other device on the
network.
address which does not conflict with any other device on the
network.
Note:
❏ The default subnet mask is 255.255.255.0 and the default
❏ The default subnet mask is 255.255.255.0 and the default
gateway is 255.255.255.255.
❏ If there is a server or a router which functions as a gateway,
enter the IP address of the server or router for the gateway
address. If there is no gateway, leave the default values.
address. If there is no gateway, leave the default values.
6. Click SUBMIT and enter the password to update the settings.
The same password is required for EpsonNet WinAssist,
MacAssist, and WebAssist. See “Password” on page 10-30 for
more information on setting the password.
MacAssist, and WebAssist. See “Password” on page 10-30 for
more information on setting the password.
7. If the message “Configuration change is complete!” appears
on your screen, the update is complete. Do not exit the Web
browser and do not send a job to the printer until this message
appears. Follow the on-screen instructions to reset the printer.
browser and do not send a job to the printer until this message
appears. Follow the on-screen instructions to reset the printer.
Note:
Since the new IP address becomes available after resetting the
printer, you need to restart EpsonNet WebAssist by entering the
new IP address.
Since the new IP address becomes available after resetting the
printer, you need to restart EpsonNet WebAssist by entering the
new IP address.