Texas Instruments 3000 Benutzerhandbuch
Using the Floppy Drive
q
If a floppy appears to be damaged, make a copy of it, if you can, and
immediately discard the damaged floppy.
immediately discard the damaged floppy.
q
Before turning off the computer, always remove a floppy from the floppy
drive.
drive.
Inserting a Floppy Into the Drive
Insert a floppy diskette into the TravelMate 3000 floppy drive as follows.
1.
Insert the floppy into the drive slot with the label side up and the metal-
shutter end first.
shutter end first.
2.
Gently push the floppy into the slot until the floppy clicks into place.
3.
To remove a floppy, press the eject button until the floppy pops out.
Cautions:
Failure to observe the following precautions can damage both the
data on the floppy and the floppy drive.
* Never remove a floppy from the drive while the indicator light on the floppy drive
and the Floppy Disk indicator light on the indicator panel are on.
and the Floppy Disk indicator light on the indicator panel are on.
* Always remove a floppy from the drive before turning off the computer.
Getting Started 3-17