Texas Instruments 3000 Benutzerhandbuch
RAM Modules
The standard TravelMate 3000 Notebook Computer is equipped with 2 MB of main
memory (RAM). If you need more RAM capacity, you can install four or eight RAM
modules (TI Part No. 2566996-0001). Every four RAM modules increases RAM by 2
MB. Installing eight RAM modules increases total main memory to 6 MB.
memory (RAM). If you need more RAM capacity, you can install four or eight RAM
modules (TI Part No. 2566996-0001). Every four RAM modules increases RAM by 2
MB. Installing eight RAM modules increases total main memory to 6 MB.
Installing the RAM Modules
To install the RAM modules, you need only a small, flatblade screwdriver. Installing the
RAM modules involves removing the keyboard, installing the modules, and replacing the
keyboard. Read this procedure before starting and, if you do not feel comfortable doing
the steps, contact your Texas Instruments dealer.
RAM modules involves removing the keyboard, installing the modules, and replacing the
keyboard. Read this procedure before starting and, if you do not feel comfortable doing
the steps, contact your Texas Instruments dealer.
Removing the Keyboard
Remove the keyboard from the computer case as follows.
1.
Turn off computer power, disconnect the AC Adapter, and disconnect
any external devices and cables connected to the computer.
any external devices and cables connected to the computer.
2.
Carefully insert the blade of a small, flat-blade screwdriver about 1/4
inch into the leftmost of three slots, behind the F1 key and between the
keyboard and the computer case as shown in the following figure.
inch into the leftmost of three slots, behind the F1 key and between the
keyboard and the computer case as shown in the following figure.
TravelMate 3000 Options 6-3