Epson 5020UB Benutzerhandbuch

Making Detailed Adjustments

■ RGBCMY

Use the RGBCMY settings to adjust the hue, saturation, and brightness of the six color 
components (red, green, blue, cyan, magenta, yellow). After adjusting each color, press 

Esc

 to move to another menu option. You can also access this setting by pressing the 

RGBCMY

 button on the remote control. See page 37 for more information. 

■ Gamma

You can select from five gamma settings (2.0 to 2.4) or customize your own setting from 
your image or a displayed graph. Lower values will increase the contrast of dark areas, but 
tend to blur the bright areas. Higher values will darken the light areas. See page 36 for 
more information.

Use the options in the 3D Setup menu to adjust 3D brightness, the 3D display format and 
other 3D settings. 

Note: You should only adjust the 3D Format and Inverse 3D Glasses

 

settings if 3D images aren’t 

displaying correctly. Changing these settings unnecessarily may cause problems with 3D 
projection.

■

3D Display

Enables or disables 3D mode. You can also change this setting by pressing the 

2D/3D

 

button on the remote control.

■

2D-to-3D Conversion

Enable this setting to convert 2D images from an HDMI or WirelessHD source 
(PowerLite Home Cinema 5020UBe only) into 3D content.

Image > Advanced > RGBCMY

Image > Advanced > Gamma

Signal > 3D Setup > 3D Display

Signal > 3D Setup > 2D-to-3D Conversion