Auto Page rs-855lcd Benutzerhandbuch

Seite von 29
 
 
14
Press the transmitter 
  (5)  and 
  (5)  buttons at the 
same time to active Channel 5 function. Channel 5 is 
user-programmable timer output. You may program the 
built-in timer to send a ground signal for any time duration 
from 1 second to 120 seconds. For instance, this timer 
output may be used to turn on the headlight, power window 
or sunroof. (Factory defaults setting at momentary output.) 
 
X. CHANNEL 6 TIMER CONTROL OUTPUT
 
 
Press the transmitter 
  (6)  and 
  (6)  buttons at the 
same time to active Channel 6 function.  Channel 6 is 
user-programmable timer output. You may program the 
built-in timer to send a ground signal for any time duration 
from 1 second to 120 seconds. For instance, this timer 
output may be used to turn on the headlight, power window 
or sunroof.   
(Factory defaults setting at momentary output.) 
 
X. SECOND VEHICLE SECURITY OPERATION:   
Your 5-button remote transmitter can be utilized to control a second vehicle 
security system, To program the remote control transmitter to a second 
vehicle, follow the instructions for Transmitter programming.   
Programming the Transmitter to 2
nd 
Car 
Enter: 
1. 
Turn the ignition key ON 3 times. (Finishing in the ON position
2. 
Press valet switch 2 times, holding in on the 2
nd
 push, you will hear a 
long siren chirp. (Release the val et switch)  
3. 
Press the shift button of the Car 2 transmitter.  
** LCD transmitter must be put in 2
nd
 car mode to program for 2
nd
 car.   
(See next page) 
4. 
Press the lock button on the transmitter; you will hear 1 siren chirp. 
Turn OFF the ignition switch; you will hear 3 long siren chirps to confirm 
programming and exit transmitter programming  
 
** 
For 2-way LCD Display Trans mitter: 
2nd
 
Car Operation: 
1. Press 
 first, within 3 seconds press and hold 
  and 
 
buttons at the same time for 2 seconds . Two beeping sound 
and the  “
” icon will  be  displayed on the LCD screen to 
indicate the second transceiver pin code is programmed. 
2.  While the “
” icon  is displayed on the LCD screen , you 
can remote control  and communicate with a second vehicle 
security system . It has two short “bi” sounds  while pressing the 
button of the LCD screen transceiver.  
Back to 1st Car Operation: