Pioneer AVIC-N1 Benutzerhandbuch

Seite von 28
13
Chapter 1
How to Use Navigation Unit and Names of the Parts
Turning the unit on and select-
ing a source
• If the program is not installed, see “Opera-
tion Manual” and install the program.
1
Turn the ignition switch (ACC) ON. 
The product’s power supply comes on.
2
Press SRC button to select a source.
Press SRC button repeatedly to switch 
between the following sources:
XM (XM tuner) — RADIO (tuner) — TV (tele-
vision) — AV (video input) — DISC [CD, 
MP3, CD/MP3](built-in DVD drive) — S-DVD 
(DVD player/multi-DVD player) — M-CD 
(multi-CD player) — EXT-1 (external unit 1) — 
EXT-2 (external unit 2) — AUX (Auxiliary 
equipment)
❒ Press and hold to turn the source off.
❒ In the following cases, the sound source will 
not change to them:
— When a unit corresponding to each source 
is not connected to this unit.
— When no disc (DVD-video, CD) is set in this 
unit.
— When no disc is set in the DVD-player (S-
DVD).
— When no magazine is set in the multi-CD 
player.
— When no magazine is set in the multi-DVD 
player.
— When the AUX (auxiliary input) is set to off 
(refer to Operation Manual).
— When the AV (video input) is not set to 
VIDEO (refer to Operation Manual).
❒ External unit refers to a Pioneer product (such 
as one available in the future) that, although 
incompatible as a source, enables control of 
basic functions by this unit. Two external units 
can be controlled by this unit. When two exter-
nal units are connected, the allocation of 
them to external unit 1 or external unit 2 is 
automatically set by this unit.
❒ When this unit’s blue lead is connected to the 
vehicle’s auto-antenna relay control terminal, 
the vehicle’s antenna extends when ACC 
(ignition) is turned on and attach the front 
panel. To retract the antenna, detach the front 
panel.
The vehicle’s antenna extends regardless of 
turning this unit’s source on or off.
Loading a disc
• Insert a disc into the disc loading slot.
Format reading will start.
For DVD-video, CD
❒ DISC AUTO is off in the default setting.
➲ DISC AUTO ➞ Operation Manual
❒ When a disc is already loaded in this unit, 
select the source  by pressing SRC but-
ton.
❒ To eject a disc, press EJECT button.
For the map disc
❒ Inserting the disc starts DVD navigation 
mode.
❒ Removing the disc sets Memory navi 
mode.
❒ You can use NAVI/AV button to switch 
between navigation map displays and audio 
operation displays.
❒ The DVD drive plays one, standard, 12-cm or 
8-cm (single) disc at a time. Do not use an 
adapter when playing 8-cm discs.
❒ Do not insert anything other than a disc into 
the disc loading slot.
➲ Playable discs ➞ Page 7
❒ If you cannot insert a disc completely or if 
after you insert a disc the disc is not recog-
nized, check that the label side of the disc is 
up. Press EJECT button to eject the disc, and 
check the disc for damage before inserting 
the disc again.