Sharp FO-4470 Benutzerhandbuch

Optional Settings

6. Optional 

Settings

Setting 31: SEPARATE MODE
If desired, you can have the fax draw a sheet of paper from one of the paper 
sources after each fax reception. By loading colored (or large) paper in that 
source, each colored sheet drawn will act as a separator that makes it easy to 
distinguish where one multi-page document ends and another begins. A 
Transaction Report printed after a reception will also be printed from that 

paper source to act as a separator sheet. To turn on this function, press 

 

and then select the paper source for the separator paper by pressing 

 for 

the paper tray or 

 for the paper cassette. After turning on the function, be 

sure to load appropriate paper in the selected paper source. To turn off 

Seperate mode, press 

. (Note that the function will turn off automatically if 

the selected paper source runs out of paper.)

Note: This setting is only available if your dealer has installed the paper cassette 
option.

♦

Initial setting: 2

Note: If you turn off the Separate Mode setting, Option Setting 16 will 
subsequently appear in the display to allow you make an appropriate setting for 
cassette selection. If you don’t make a selection, 1:AUTO SELECTION will be 
automatically selected.

Note: Settings 32 and 33 are not used.

Setting 34: LANGUAGE SELECT
This setting is used to select the language that appears in the display. Press 

 to select English or 

 to select French.

♦

Initial setting: 1

Note: Settings 35 through 38 are not used.