Aleratec 330107 Benutzerhandbuch

www.aleratec.com

10

2.  Press the OK button on the display panel. The USB Duplicator will start 

to read the source content into the system’s buffer and immediately start 

copying any loaded target USB flash drives.

3.  Load the blank target flash drives into the USB Duplicator. The LCD will 

display the number of blank media loaded and copying.

Note: When copying is in process the Green LED on the front panel is 
blinking. Do not take out the drive while it is copying. When copying is 
finished the Green LED stays on (no blinking). If an error occurs during the 
copy process a Red LED will display. 

4.  As finished drives are removed, and new blanks inserted, the display 

will show the number of copies completed and the number of USB 

flash drives still in the copying process. If the Copy fails, the LCD will 

display the number of flash drives that failed and passed.

Note: During Asynchronous Copying you can use the UP and DOWN 
arrow keys to check each flash drives copying status. 























