TP-LINK TD-8817 Benutzerhandbuch

 

6 

 

Figure 2-3 



The diameter of the screw, 4mm<D<7.5mm, and the distance of two screws is 111.5mm. The 
screw that project from the wall need around 4mm based, and the length of the screw need to be 
at least 20mm to withstand the weight of the product. 

The procedure to install the 

modem router can be described in the following steps: 

First Step: Connect the Modem port of Splitter with the ADSL port of the modem router by 
telephone line.   

Second Step: Connect category 5 cable with RJ45 jacks to modem router’s LAN port and your 
computer’s NIC. Or connect USB cable to ADSL2+ Ethernet/USB Modem Router’s USB port and 
your computer’s USB interface.

 

(When you connect your PC to the modem router through the 

USB port, please install the USB driver first. For the detailed operation please refer to 

Third Step: Plug one end of the provided Power Adapter into the Power jack on the modem 
router and the other end to a standard electrical outlet. 

Last Step: Check the line connection to see if everything is ready. Power up finally.