Sony Ericsson Z600 Benutzerhandbuch

17

Getting started

Battery

Use only the Sony Ericsson-specified Z600 
battery and charger. When supplied, your 
battery will not be fully charged.

 Both the status bar within the battery icon in 

the display and the charging indicator (red) 
show the charging status.
Charging (5 °C-45 °C) is complete when 

 

appears.
Full charging can take up to approximately 
3 hours, but may vary depending on certain 
conditions (for example, if your phone is 
switched on or if temperature is outside the 
operating range).
When your battery is completely empty, it can 
take some time until the battery icon appears 
during charging.
As an energy-saving measure disconnect the 
charger from both the mains socket and the 
phone after charging.
On exposure to high temperatures your battery 
may expand slightly. This has no influence on 
your safety/health and will reduce to its original 
size once re-exposed to a lower temperature.

Inserting the Battery

1

Slide the battery cover down to remove.

2

Align the claws on the battery terminal with 
those of the phone and press battery down.

3

Align the claws at the side of the cover with 
slots of the phone and slide back into place 
until the lock clicks.