Epson StylusPro10000 Benutzerhandbuch

This section explains how to set up the Stylus Pro 10000 as a shared printer 
on an AppleTalk network. First install the printer software on every 
computer that will need to access the printer, as described on page 1-13.

Then configure the host Macintosh (the computer to which you connected 
the printer) to share the printer, and configure the client Macintosh 
computers to connect to it, as described in the next two sections.

Perform these steps on the Macintosh to which you connected the printer:

1. Turn on the printer, open the Chooser, and click the printer’s icon. 

Then select the icon for the USB port your printer is connected to.

2. Click the On radio button to turn Background Printing on.

3. Click the Setup button. You see the following dialog box.

This section tells you 
how to configure your 
printer as a shared printer 
on a network. To connect 
your printer directly to a 
network without setting 
it up as a shared printer, 
consult your network 
administrator.

Turning background 
printing on allows you to 
use Monitor3 to manage 
the print queue on the 
host computer. See 
page 3-14 for details.