Epson Z8450WUNL Benutzerhandbuch

When projecting to a wide screen from multiple projectors, you can 
adjust the difference of brightness and color tone between the edges of 
each projected image (Edge Blending), to create a seamless screen.

There are two general methods of projecting from multiple projectors.

The following is an example of using method U. (Method V follows the 
same basic flow except you use the scale function to adjust the position of 
the projected image s

Settings are explained here using the remote control, but they can also be 
set by the control panel.

• Two or more projectors that support Edge Blending
• A dedicated computer with a GPU that has two or more outputs (VGA, 

DVI, HDMI, etc.) and supports Edge Blending

• Cables to connect the computer to the projectors

When an ID is set for the projector and the remote control, you can use 
the remote control to operate only the projector with a matching ID. This 
is very useful when managing multiple projectors.

When operating all of the projectors from the remote control, set the ID 
switch on the side of the remote control to Off.

U

Projecting different images from each projector, and creating a 
seamless screen

V

Projecting the same image from each projector, using the Scale 
function to project a large image

1. Requirements

2. Setting the projector ID and the remote control ID

3. Adjusting the position of the projected image

4. Checking the Color Mode

5. Using the edge blending function 

6. Adjusting to match colors