Epson Z8450WUNL Benutzerhandbuch
Changing the Projected Image
26
q
The following screen showing the status of image signals remains displayed
when only the image that the projector is currently displaying is available,
or when no image signal can be found. You can select the input port where
the equipment you want to use is connected. If no operation is performed
after about 10 seconds, the screen closes.
when only the image that the projector is currently displaying is available,
or when no image signal can be found. You can select the input port where
the equipment you want to use is connected. If no operation is performed
after about 10 seconds, the screen closes.
Switch to the Target Image using the Remote Control
You can change directly to the image from the target input port by
pressing the following buttons on the remote control. s "Remote
Control"
pressing the following buttons on the remote control. s "Remote
Control"
When switching to LAN, images from computers connected through the
network are projected.
network are projected.
*
PowerLite Pro Z8450WUNL/Z8455WUNL only