Epson Z8450WUNL Benutzerhandbuch

You can set whether or not (On/Off) to use DHCP

g

.

If this is set to On you cannot set any static IP addresses.

You can input the IP address

g

 assigned to the projector.

You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.

0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)

You can input the Subnet Mask

g

 for the projector. You can input a number from 0 to 255 in each field of the address. However, the 

following subnet masks cannot be used.

0.0.0.0, 255.255.255.255

You can input the IP address for the gateway for the projector.

You can input a number from 0 to 255 in each field of the address. However, the following Gateway addresses

g

 cannot be used.

0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)

To prevent the IP address from being displayed on the LAN Standby screen, set this to Off.