Troy-Bilt 2100 Benutzerhandbuch

When engaged, the augers rotation draws snow into the auger 

housing and throws it out the discharge chute. Rubber paddles 

on the augers also aid in propelling the snow thrower as they 

come in contact with the pavement.

Located on the upper handle, the auger control handle is used 

to engage and disengage drive to the auger. Squeeze the control 

handle against the upper handle to engage the auger; release it 

to disengage.

Rotate the discharge chute to the left or right using the chute 

handle. The pitch of the discharge chute controls the angle at 

which the snow is thrown. Loosen the wing knob on the side of 

the discharge chute before pivoting the discharge chute upward 

or downward. Retighten the knob once the desired position has 

been achieved.

The shave plate maintains contact with the pavement as 

the snow thrower is propelled, allowing snow close to the 

pavement’s surface to be discharged.

The electric starter outlet requires the use of a three-prong 

outdoor extension cord and a 120V power source/wall outlet. 
NOTE: The electric starter is mounted to the plastic shroud and is 

shown in Fig. 4-1 attached to the engine for easier reference.

Pressing the electric starter button engages the engine’s electric 

starter when plugged into a 120V power source.