Tally Genicom 6600 Benutzerhandbuch
Normal Command (Normal and EXECUTE Mode)
197
Normal Command (Normal and EXECUTE Mode)
This command can be used in all modes. If the printer is in CREATE mode or
EXECUTE mode, this command places the printer back into NORMAL Mode.
If you are already in NORMAL Mode, sending this command will reset the
printer to its Font and LPI defaults. The command format is:
EXECUTE mode, this command places the printer back into NORMAL Mode.
If you are already in NORMAL Mode, sending this command will reset the
printer to its Font and LPI defaults. The command format is:
PGL Mode Control
Quiet Command (Normal)
This command disables the PGL Mode of your printer. The only PGL
command the printer will respond to is the Listen Command. The Quiet
Command format is:
command the printer will respond to is the Listen Command. The Quiet
Command format is:
Table 32. NORMAL Mode Command
Field
Function
Option/Modifier Selections
NORMAL
Initiates NORMAL Mode.
Enter the current Special Function Control
Character followed by NORMAL.
Character followed by NORMAL.
Table 33. Quiet Command
Field
Function
Option/Modifier Selections
QUIET
Command Specifier. Turns off
Graphics Mode.
Graphics Mode.
Enter the current Special Function Control
Character followed by QUIET.
Character followed by QUIET.