Epson Printer Benutzerhandbuch
Appendix A
Specifications
CPU and Memory
32-bit CPU
Green PC
energy saver
energy saver
System speed
Memory
ROM
Cyrix 486SLC2-50 microprocessor
Energy Star compliant, low-power
standby mode for the hard disk drive and
video signals sent by the computer to the
monitor; select timeout periods in SETUP;
in a standard configuration of one hard
in a standard configuration of one hard
disk drive and one diskette drive, system
consumes less than 30 Watts in standby
consumes less than 30 Watts in standby
mode
Fast and slow speeds available; fast speed
is the speed of the microprocessor, slow
is the speed of the microprocessor, slow
speed is 8 MHz
Press Ctrl Alt - to select slow speed or
Ctrl Alt + to select fast speed (use the - or +
key on the numeric keypad); default
system speed selectable through SETUP
4MB RAM standard on SIMMs;
expandable to 16MB using 1MB or 4MB
SIMMs; SIMMs must be tin-plated, 30-pin,
8-bit or 9-bit, fast-page mode type with
SIMMs; SIMMs must be tin-plated, 30-pin,
8-bit or 9-bit, fast-page mode type with
access speed of 70ns
128KB Phoenix
®
system BIOS, video BIOS,
and SETUP code located in EPROM on
main system board
main system board
Specifications A-1