Alliance Laundry Systems SWD439C Benutzerhandbuch
Installation
800937
14
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Step 6: Connect Dryer Exhaust System
For further assistance, refer to sections on Location
Requirements and Dryer Exhaust Requirements.
Requirements and Dryer Exhaust Requirements.
●
DO NOT use plastic or thin foil ducting.
●
Locate unit so exhaust duct is as short as
possible.
possible.
●
Be certain old ducts are cleaned before installing
your new dryer.
your new dryer.
●
Use 4 in. (10.2 cm) diameter rigid or flexible
metal duct.
metal duct.
●
The male end of each section of duct must point
away from the dryer.
away from the dryer.
●
Use as few elbows as possible.
●
Use duct tape on all duct joints.
●
Ductwork that runs through unheated areas must
be insulated to help reduce condensation and lint
build-up on pipe walls.
be insulated to help reduce condensation and lint
build-up on pipe walls.
●
Failure to exhaust dryer properly will void
warranty.
warranty.
Figure 14
NOTE: Venting materials are not supplied with the
unit (obtain locally).
unit (obtain locally).
A clothes dryer produces combustible lint.
To reduce the risk of fire and combustion
gas accumulation the dryer MUST be
exhausted to the outdoors.
To reduce the risk of fire and combustion
gas accumulation the dryer MUST be
exhausted to the outdoors.
W116
WARNING
SWD449N
SWD449N
DO
DON’T