Sony Ericsson M3000 Benutzerhandbuch

Plantronics Ltd - Released

T68 M3000 pair rev002

July 2003

M3000 Pairing Instructions – Sony Ericsson T68 Mobile Phone

Before pairing the Plantronics M3000 with the Sony Ericsson T68, please ensure

both devices are fully charged according to the instructions in the respective User

Guides.

1. Turn the Sony Ericsson T68 phone and the Plantronics M3000 headset ON.

2. On the T68, using the Joystick:

i. Select “Connect” and press the joystick.

ii. Scroll down to “Bluetooth” and press the joystick

iii. Scroll down to “Operation Mode”, and press the joystick

iv. Scroll down to “On” and press the joystick.

Bluetooth is now be switched on in the phone.

Note: If Bluetooth has already been activated, press the “No” Key (End Call

button).

3. On the Plantronics M3000:

i. Put the M3000 into pairing mode by press the “Volume Up” &

“Call Control” buttons simultaneously until the Indicator light

begins to flash alternate green and red. (see M3000 User

Instructions).

4. On the Sony Ericsson T68 under “Bluetooth” menu:

Scroll down to “Paired Devices” and press the joystick

ii.

The phone will display “Add Device”. Press the joystick.

iii.

Scroll to “Phone initiates” and press the joystick.

iv.

Scroll to “Headset” and press the joystick.

The phone will display “Searching”

vi.

After a few moments the phone will display all the Bluetooth

devices within range. Select the “M3000 by Plant” and press

the joystick.

vii.

The phone will request the “Passkey:”. Enter 0000 using the

keypad then press the joystick. The phone will display

“Pairing” followed by “Pairing Successful”.

viii.

The phone will show “Name Tag:” M3000 by Plantronics.

Press the joystick.

ix.

The phone will show “Added to Paired Devices”

Use the “No” Key (End Call button) to return to the main

menu.

Your M3000 headset is now paired with the T68 phone.