Texas Instruments 4000M Benutzerhandbuch

„

Failure to observe the following precautions can damage both the
floppy drive and the data on the floppy:

„

Insert the floppy into the floppy drive slot with the label side up and
the metal-shutter end first.  Gently push the floppy into the floppy
drive slot until the floppy clicks into place.

„

To remove a floppy, press the eject button until the floppy pops out.

„

Never remove a floppy while the indicator on the floppy drive is on.

„

Never force open the access shutter on a floppy.

„

Always remove a floppy from the floppy drive before turning off the
computer.

„

Never transport the computer with a floppy in the floppy drive.  Doing
so can damage the drive head.

„

If a floppy appears to be damaged, try to make a copy of it, and
immediately discard it.

„

Keep all floppies when not in use in a disk storage box to protect them
from damage or loss.