Epson 4012033-00 XXX Benutzerhandbuch

Epson

1-2

Installing and Setting up the Software

L

Proof Sign-off:
K. Pipa

_______

M. Fujimori

_______

R. Thomson

_______

R4C5700
Rev. C

A5 size

INSTALL.FM

4/6/01

Pass 0

❏

To take pictures while your camera is connected to your
computer, see “Using the Controls Menu” on page
2-16.

❏

You can save battery power by using the optional AC
adapter whenever you connect the camera to your
computer.

❏

When the camera is connected to your computer via the
USB cable, the camera’s automatic power save feature
is disabled.

Using the USB cable

To connect the camera to your computer via a USB
cable, use the USB cable included with your camera.

c

Caution:
Be sure to use the USB cable that comes with your
camera to avoid damaging the camera’s interface
connector.

Note:
❏

You can connect or disconnect the USB cable from the
computer or camera while the computer and camera are
turned on. If a dialog box appears, follow the directions
in “Installing the USB driver” on page 1-7 to install
the software.

❏

Although you can connect and disconnect the USB
cable at any time, EPSON recommends connecting it
in the manner described above to secure the connection.

❏

If your camera does not work properly when connected
to a USB hub, see page 4-3 of Chapter 4,
“Troubleshooting.”

Follow the steps below.

1.

Turn on your computer.

2.

Plug the cable connector into the USB port on your
computer or USB hub.

USB port on
computer

USB cable