Epson 4012033-00 XXX Benutzerhandbuch

Seite von 81
2-4      
Using EPSON Photo!3
L
Proof Sign-off:
K. Pipa
_______
M. Fujimori
_______
R. Thomson
_______
R4C5700
Rev. C
A5 size
PHT3.FM
4/6/01
Pass 0
Note:
While the camera and the computer are communicating 
via the serial cable, star icons move across the camera's 
display panel. Avoid opening or using other 
applications while communication is occurring; 
otherwise, communication may be interrupted.
When you connect the camera and computer via the 
USB cable, star icons move across the display panel 
continuously because the camera and computer are 
always communicating.
If the Setup menu is displayed when EPSON Photo!3 
opens, your camera and computer may not be 
connected properly.
Connect the camera to your computer and make sure 
that your camera is on and that the dial switch is set 
to 
. Then click the Test Connection button.
You can use EPSON Photo!3 without connecting your 
camera and computer; however, the Camera and 
Controls menus are disabled in this situation.
If you still cannot access the Camera menu, see “Using 
the Setup Menu” on page 2-19
 establish a proper 
connection.
The EPSON Photo!3 menus are described briefly 
below.
Camera menu
The Camera menu displays small thumbnail images 
of all of the photos stored on the camera’s memory 
card. From here, you can transfer any image to the 
computer or erase it from the memory card.
Folder menu
The Folder menu displays thumbnail images of the 
photos that have been saved to a folder on your hard 
disk. Select images to transfer them to an application, 
or to erase them from the folder. You can also upload 
these images from your computer to your camera’s 
memory card.
After checking the 
connection between 
the camera and 
computer, click here.