Epson elp-3000-3300 Benutzerhandbuch

Easy Setup

Plug the LCD

connector on the
Y-cable into the
projector5 Computer

2

Plug the VGA connector on the

IN/OUT port.

Y-cable into the laptop’s monitor port.

Tighten the screws for all connectors.

Connect an AC adapter to the laptop or
PowerBook and plug it into a wall outlet.

Using The Projector

a. Turn on the projector and then turn on the

computer.

b. If you’re using a PowerBook™, choose Mirroring in

the Display Control Panel. If you’re using a PC
laptop, you may have to set the display to appear
on both the computer’s screen and the projector.

c.

Zoom in the image (make it smaller) by rotating
the zoom ring.

d. Adjust the focus by rotating the focus ring and

zoom out to correct image size.

e.

If the image is too high or too low, press the
purple buttons and raise or lower the projector.

f.

Turn the feet to further adjust the height.

Attach the Macintosh VGA adapter to

Connect the Macintosh VGA

Plug the video-out cable into

the VGA connector on the Y-cable.

adapter to the PowerBook’s video-

the video-out connector on the

out cable.

back of the PowerBook.

See your 

if you want to control the

projector from your computer or use external audio
or video sources, an external speaker, or a desktop
computer.

If you need help or EPSON Road Service, call

1-800-922-8911.

Take Along Checklist

 Computer
 Projector lens cover
 Power cord
 Y-cable
 Remote control unit
 Macintosh® adapters: VGA, monitor, and serial

RS-232C serial cable and ELP Utilities Diskettes

 AV (audio/video) cable (for external sources)

Extra AA batteries (for the remote control 
and lamp

EPSON is a registered trademark of Seiko Epson Corporation. Other product names used herein ore for identification purposes only and may be trademarks of their respective owners. EPSON disclaimers any and all rights In those marks.
Copyright   1996 by Epson America, Inc., Torrance, California, USA

10/96