Epson 200 Benutzerhandbuch
Epson PowerLite Cinema 200 Projector
1/04
Epson PowerLite Cinema 200 Projector - 5
Locking the Projector
You can lock the projector to prevent the image from being
accidentally changed once it’s adjusted, and to keep children
from using the projector without adult supervision.
accidentally changed once it’s adjusted, and to keep children
from using the projector without adult supervision.
1. Press the
Menu
button on the remote control.
2. Use the menu navigation buttons to open the
Setting
menu,
then open the
Operation
menu and select
Lock Setting
.
3. Choose from these options:
❏
Focus Lock
to prevent the focus from being changed.
❏
Zoom Lock
to prevent the picture size from being
changed.
❏
Child Lock
to make it more difficult to turn on the
projector from the control panel (but does not affect
operation of the remote control).
operation of the remote control).
To turn on the projector, either use the remote control,
or press and hold the projector’s P
or press and hold the projector’s P
Power
button for at
least 3 seconds.
❏
Key Lock
to disable all the buttons on the projector’s
control panel.
Basic Image Adjustments
Once the projector is turned on, use these functions to adjust
the image.
the image.
Selecting the Image Source
If you don’t see the image you want, press the
Source
button
on the remote control that corresponds to the port to which
your video equipment is connected. For example:
your video equipment is connected. For example:
Note: If you still don’t see an image after selecting the source, check
the troubleshooting tips on page 7. You can also use the Source
button on the projector’s control panel.
the troubleshooting tips on page 7. You can also use the Source
button on the projector’s control panel.
Focusing and Zooming the Image
To adjust the sharpness or size of the image:
1. Press the
Focus
or
Zoom
button on the projector or remote
control.
You see this screen:
2. Use the
arrow buttons to adjust the image.
Note: If you use the remote control, you can stand close to the screen
while focusing the image. This lets you adjust the picture more
precisely.
while focusing the image. This lets you adjust the picture more
precisely.
3. Press
ESC
when done.
Inverting and Mirroring the Image
If the image is upside-down or backwards, use the Projection
function to adjust it:
function to adjust it:
1. Press the
Menu
button on the remote control.
2. Use the menu navigation buttons to open the
Setting
menu,
then open the
Screen
menu and select
Projection
.
3. Choose from these options:
❏
Front
if the projector is located in front of the screen (for
example, on a table).
❏
Front/Ceiling
if the projector is located in front of the
screen and mounted overhead.
❏
Rear
if the projector is located behind the screen.
❏
Rear/Ceiling
if the projector is located behind the screen
and mounted overhead.
Selecting the Input Signal
If you’re using the projector’s Input A port, select the correct
setting for the type of video equipment you’ve connected to it:
setting for the type of video equipment you’ve connected to it:
1. Press the
Menu
button on the remote control.
2. Use the menu navigation buttons to open the
Setting
menu,
then open the
Input Signal
menu and select
Input A
.
3. Choose from these options:
❏
YCbCr
for a video player that outputs an NTSC signal.
❏
YPbPr
for a video player that outputs an HDTV signal.
❏
RGB-Video
if your video player outputs an RGB video
signal.
To select the image source
connected to the Video port . . .
connected to the Video port . . .
. . . press the Video button