Epson EB-1910 Benutzerhandbuch

Check

Remedy

Is the firewall turned off, or has the firewall been registered as an
exception?

When you do not wish to turn off the firewall or register the firewall as an exception, make the necessary settings
to open the ports.
The ports used by EasyMP Network Projection are "3620", "3621", and "3629".

Is the network cable connected correctly?

Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected properly.

Check

Remedy

Are the connection denial functions, such as MAC Address

restrictions and port restrictions, set correctly at the access point?

Set the projector to allow connections from the access point.

Are the IP address, the Subnet Mask, and the Gateway Address
for the access point and the projector set correctly?

When not using a DHCP, adjust each setting.s 

Are the access point and the projector's subnet different?

Select Manual search from EasyMP Network Projection, specify the IP address, and connect.
s

Check

Remedy

Are you using PowerPoint 2002 or an earlier version?

To set and use two or more virtual displays

, use PowerPoint 2003 or later, or limit the number of virtual

displays to one before displaying the Slide Show.

Check

Remedy

Is another application running on the virtual display

When EPSON Virtual Display is installed, another application sometimes runs on the virtual display. In this case,
set EPSON  Virtual Display to "Off" in "Screen properties".