Trimble Outdoors 58052-00 Benutzerhandbuch
1 STARTER KIT
8 Copernicus GPS Receiver
Interface Unit
Inside the starter kit interface unit, the Copernicus GPS reference board sits on a shelf
supported by 4 standoffs above the motherboard. The antenna transition cable is
mounted to the outside of the unit and connects to the MCX connector on the
reference board. An 8-wire ribbon cable interfaces the power and I/O between the
reference board and motherboard.
supported by 4 standoffs above the motherboard. The antenna transition cable is
mounted to the outside of the unit and connects to the MCX connector on the
reference board. An 8-wire ribbon cable interfaces the power and I/O between the
reference board and motherboard.
Figure 1.1
Starter Kit Interface Unit
Figure 1.2
AC/DC Power Supply Converter