Trimble Outdoors 58052-00 Benutzerhandbuch
A TRIMBLE STANDARD INTERFACE PROTOCOL (TSIP)
1 7 0 Copernicus GPS Receiver
Report Packet 8F-17 - UTM Single Precision Output
This packet reports position in UTM (Universal Transverse Mercator) format. The
UTM coordinate system is typically used for U.S. and international topographical
maps.
UTM coordinate system is typically used for U.S. and international topographical
maps.
The UTM coordinate system lays out a world-wide grid consisting of the following:
•
60 North/South zones in 6° increments, extending eastward from the
International Data Line.
International Data Line.
•
10 East/West zones in 8° increments, extending above and below the equator.
Coordinates within these boundaries cover all surface locations from 80° South to 84°
North and encircle the earth. Locations are indicated by offset from the equator and in
the zones east of the International Date Line. These offsets are known as Northing
and Easting, and are expressed in meters. UTM is not usable in polar regions.
North and encircle the earth. Locations are indicated by offset from the equator and in
the zones east of the International Date Line. These offsets are known as Northing
and Easting, and are expressed in meters. UTM is not usable in polar regions.
Table A.67
Report Packet 8F-17
Byte
Item
Type
Value
0
Subcode
0x17
1
Gridzone Designation
Char
2-3
Gridzone
INT16
4-7
Northing
Single
Meters
8-11
Easting
Single
Meters
12-15
Altitude
Single
Meters
16-19
Clock Bias
Single
Meters
20-23
Time of Fix
Single
Seconds