Trimble Outdoors 58052-00 Benutzerhandbuch
Copernicus GPS Receiver 2 3 5
NMEA 0183 C
RT - Reset
This sentence can be used to Set the reset type. No query is supported.
$PTNLaRT,b,c,d..x*hh<CR><LF>
Table C.28
Reset Type
Field
Description
a
Mode (S = set; R = Response)
b
Command
C
Cold software reset, Erase SRAM including the
customer configuration in SRAM and restarts.
customer configuration in SRAM and restarts.
W
Warm software reset. Erases the ephemeris information
in SRAM and restarts.
in SRAM and restarts.
H
Hot software reset. Uses the entire SRAM data.
F
Factory software reset. Erases the customer
configuration, the almanac, ephemeris and last
position in Flash Memory and in SRAM
configuration, the almanac, ephemeris and last
position in Flash Memory and in SRAM
S
Set the receiver into Standby Mode.
c
Flash operation
0
reserved
1
reserved
2
store user configuration to Flash Memory
3
store user configuration to Flash Memory
4
Erase Almanac, ephemeris and last position from Flash
Memory
5
Erase user configuration from Flash Memory
6
Erase Almanac, ephemeris, last position and user
configuration from Flash Memory
d
Wakeup from Standby Mode flags:
001 Wakeup with serial Port A activity
010 Wakeup with serial Port B activity
011 Wakeup with serial Port A or B activity
100 Wakeup after elapsed time specified in the next
field
field
101 Wakeup after elapsed time specified in the next
field or serial Port A activity
field or serial Port A activity
110 Wakeup after elapsed time specified in the next
field or serial Port B activity
field or serial Port B activity
111 Wakeup after elapsed time specified in the next
field or serial Port A or B activity
field or serial Port A or B activity
x..x
If command is 'S', this field specifies time to stay in Backup
(Standby) Mode in seconds. Maximum value 2
(Standby) Mode in seconds. Maximum value 2
31
.